Nuts
Hexagon_nuts_DIN934
They are used with anchors, bolts, screws, studs, threaded rods and on any other fastener that has machine screw threads.
Hexagon_nuts_BS1083
• Hex are used with anchors, bolts, screws, studs, threaded rods and on any other fastener that has machine screw threads.
Hexagon_lock_nuts_DIN439
• A Lock nut can be threaded onto a bolt and run tight against the standard nut which will lock the nut in place and prevent it from backing off.
• Lock nuts are sometimes used for leveling purposes as well.
Nylock Nut DIN 982/DIN985
• Ideal in applications where vibration or motion could loosen or undo the nut.
• The nut can also be used to assist sealing the bolt thread against seepage of oil, water, petrol, paraffin and other liquids.
Dome_cap_nuts_din1587
• From being used for its aesthetics as a cover for threaded rods and as caps for machine screws in architectural metalwork.
• Utilized in the car modification business as an alternative to manufacturer-supplied nuts and fixings.
Wing_nuts_din 315
• They are used in low-torque applications that require quick or frequent adjustment or disassembly and are intended to be tighten and released using your fingers.
Square_Nuts_DIN557
Square nuts are used along with flat washers in order to avoid damage from its sharp edges and helps to increase the strength of the fastener.
Hexagon_flange_nuts_DIN6923
This serves to distribute the pressure of the nut over the part being secured, reducing the chance of damage to the part and making it less likely to loosen as a result of an uneven fastening surface.
Eye nut DIN 582
• They are designed to receive a hook or rope
• Load-rated eye nuts are designed for vertical lifting.
